Modular designed multipurpose telescope, both for observing the sun in the H-alpha wavelength, as well as for night sky observations. Easy conversion between the different applications with a few simple steps. 3-lens apochromatic telescope with FPL-53 glass, 100 mm aperture and 714 mm focal length - excellent image quality for H-Alpha solar observation and also for observing the starry sky at night. With innovative air pressure tuning system, good 2 inch (50.8 mm) R&P focuser, and B3400 blocking filter. Solar observation in H-alpha: The LS100MT/B3400 is a complete telescope for observing the sun in H-alpha light, with 100 mm free aperture (no central obstruction) and 714 mm focal length. The H-alpha wavelength is the most impressive way to observe the sun, showing protuberances at the sun's edge, filaments and flares on the surface, and much more. An internal Etalon filter achieves a bandwidth of <0.7 Angstrom with the innovative air pressure tuning system Pressure-Tuner. Tuning is done by slightly changing the air pressure in a pressure chamber inside the telescope. This changes the refractive index of the air, making it easy to tune to the H-alpha line. The pressure tuner guarantees a homogeneous image, without central obstruction, and a permanently protected Etalon without erosion. A set of collimating lenses installed in the telescope ensures best performance. Fine adjustment is achieved with a solid 2 inch R&P focuser with 10:1 reduction. Blocking filter is the B3400. The B3400 is good for solar imaging by cameras with very large sensor chips and can also be used for visual solar observing. The B3400 blocking filter is permanently installed inside the 2 inch R&P focuser. Common 2 inch star diagonals or other 2 inch accessories can be used. Observing the starry night sky: The H-Alpha Etalon system can be removed from the telescope in a few easy steps thanks to its modular design. With the additionally available conversion kit (item number 0551430) the 3-lens apochromatic refractor can then be used as a normal telescope with 100 mm aperture and 714 mm focal length for observation and photography of the night sky. The FPL-53 triplet lens offers an outstandingly low colour aberration image. Common 2 inch star diagonals can be used at the high quality R&P focuser of the conversion kit 0551430. Please note that the optionally available conversion kit 0551430 is absolutely necessary if the telescope should be used at night. More applications: With additionally available accessories the LS100MT offers even more possibilities! - Double-Stack The LS100MT telescope can optionally be upgraded with the additionally available double-stack module DSII/SFPT (item number 0551395). The DSII system is an internal double-stack module. Thereby a bandwidth of <0.5 Angstrom is achieved for H-alpha solar observation. Thus much more details on the solar surface will become visible. - Solar observing in White-Light If the H-alpha unit has been removed, of course either a sun filter to be installed in front of the objective, or a Herschel-wedge at the focuser can be used to observe the sunspots in White-Light. - Solar observing in Ca-K wavelength Certainly, the Ca-K filter modules from LUNT Solar Systems can also be used at the LS100MT to observe and photograph super-granulation and other effects visible in this wavelength on the sun. This makes the LS100MT a completely universal usable apochromatic telescope of the highest quality! FEATURES 3-lens APO refractor, FPL-53 Aperture: 100 mm (no central obstruction) Focal length: 714 mm Bandwidth: internal Etalon with <0.7 Angstrom Tuning: air pressure tuning system Pressure-Tuner Blocking filter: B3400 with 2 inch connection Focuser: R&P with 10:1 reduction Two tube-ring with handle Sol-Searcher installed inside handle Dovetail bar at GP-level for astronomical mounts Weight: 6.8 kg Length with dew-shield: 78 cm Length with removed dew-shield: 65 cm SCOPE OF DELIVERY LS100MT Multipurpose Telescope Pressure-Tuner B3400 blocking filter installed inside focuser 2 inch R&P focuser with 10:1 reduction Tube rings with dovetail bar Transport case (78 x 33 x 23 cm) Instruction manual Conversion kit for observation of the starry night sky (0551430) not included!

Vixen has developed a new generation of SX mounts for demanding observers and astrophotographers. The SXD2WL mount is simply operated via a Wifi module with a smartphone or tablet. By controlling the mount with your smartphone using the free STAR BOOK Wireless app, you can easily use sky navigation functions such as automatic GoTo panning of celestial objects via your smartphone or tablet. By eliminating the power consumption of the conventional LCD (STAR BOOK TEN), the power consumption on the mount is reduced by up to 20%, thus enabling longer astronomical observation and astrophotography. When the desired celestial object is selected from a list, it is automatically panned into the telescope's field of view and tracking begins. An existing STAR BOOK TEN controller can also be used on this mount without any problems. Equipped with the same precision stepper motors as the top model, the AXD mount, the SXD2WL brings a new standard of performance and precision to the Vixen mount family. With a photographic load capacity of 15 kg, the axis cross of the mount weighs just 9.2 kg making it ideal for mobile observations. In addition, the motors mounted in the lower part of the mount also serve as a counterweight, so the mount requires fewer weights for balancing. The SXD2 mount in detail Precision stepper motors and micro-step motion control system At the heart of the SXD2 are the precision stepper motors, which offer better performance and response than previous models. The micro-step motion control system offers powerful and yet very smooth drive characteristics, which are given both in fine movements and in fast pans. Built-in bearings The bearings of the RA and DEC axes and the worm shafts have been significantly improved to reduce the load on the motors. As a result, the motors move much more smoothly than in previous models. High-precision worm gears High-precision processing technologies eliminate worm gear errors. The edges of the two worms and worm wheels are particularly smooth, enabling very precise tracking. Declination axis as counterweight The solid motor units are installed in the lower part of the declination axis so that the center of gravity of the SXD2 is below the intersection point of the RA and DEC axes. This means you need fewer additional counterweights. Latitude setting The latitude is adjustable between 0 and 70 degrees (divided into 3 zones and adjustable +/- 15 degrees per zone, for high, medium and low latitudes); latitude scale in 2-degree increments; fine adjustment with a tangent screw head, approx. 0.8 degrees per turn. Built-in PFL-II polar finder with illumination The built-in 5x20mm polar finder with 10° field of view has a 3-star alignment system. This eliminates the inconvenience of setting the date and original time. The illuminated reticle with variable brightness and automatic switch-off is adjustable in 8 levels and illuminated in red. The adjustment accuracy is 3 arc minutes. The wireless module in detail The Vixen Wifi adapter for EQ mounts allows you to control your Vixen mount via a smartphone or tablet. With the smartphone app STAR BOOK Wireless (free of charge) you can navigate the sky without any cables. The app turns your smartphone or tablet into a control unit for the equatorial mount in no time at all. The response delay of the mount, which is considered the biggest disadvantage of wireless connections, has been reduced to a level comparable to wired connections. Reduced power consumption compared to conventional controllers with LCD monitor The power consumption of the mount is reduced by up to 20%, allowing longer observations than with conventional wired controllers such as the STAR BOOK TEN. Operation similar to the STAR BOOK TEN controller. The STAR BOOK Wireless app has a similar structure to the STAR BOOK TEN controller. Depending on the star map setting, it contains up to 259,000 celestial objects. Tap on a celestial object in the object list and start the GoTo. The mount will now automatically move to this target and bring it into the telescope's field of view. All the popular features of the STAR BOOK TEN are retained Convenient operation When looking through the telescope operate the mount by swiping on the app's star chart. As there are no buttons, simply slide your finger over the star chart to operate the mount conveniently. Extensive astronomical data included In addition to data on easily observable celestial bodies such as Messier objects, NGC objects and IC objects, this also includes the sun, moon, planets, comets and dwarf planets. High-precision alignment By aligning the mount to one or two stars, you can already achieve fairly precise positioning. By aligning the mount to three or more stars, you can achieve high-precision alignment of the mount for high magnifications. The objects are then approached precisely and centrally in your telescope's field of view. The alignment information is saved and can be retained even when the device is switched off. By leaving the telescope in its current state after completing an observation without moving it, you can start the automatic installation with the same settings for the next observation.  Individual setting options As with the STAR BOOK TEN control unit, the app offers various individual settings, such as gear backlash compensation, night mode in red, autoguider and variable GoTo speed and LED brightness. You can also set the timing of the reversal of the objective tube (meridian flip) as desired. Even if the object moves to the south during tracking, you can prevent the telescope tube from reversing. Important note: Cannot be used on old SX mounts with the old blue Star Book! Technical information about the Wifi module: CPU with 32-bit CISC processor 120 MHz The unit is connected to the mount via a D-SUB 9PIN connector as with the STAR BOOK TEN. It has a 6-pin 6-wire modular plug for external autoguider operation. Supported operating systems are Android 6 or higher, iOS 9.0 or higher, WLAN standard: IEEE 802.11b/g/n. FEATURESRA sprocket: 180 teeth DEC sprocket: 180 teeth Shaft material and diameter: Carbon steel / Decl. 35 mm, RA 40 mm thickness Polar finder scope: 6x20 mm, PFL-II polar finder Fine height adjustment: 0° to 70°, (fine adjustment +/- 15°, height) Backsight rod: 20 mm diameter Azimuth adjustment: worm fine adjustment Power supply: DC12 V; 0.4~1.7 A Maximum load: 15 kg, photographic, without counterweight Counterweight: 1x 1.9 kg and 1x 3.7 kg Tripod connection: 45 mm spigot Dimensions: 36 cm (H) x 12 cm (W) x 36 cm (L) Weight: 8.8 kg (19.4 lb), without counterweight 32-bit CISC processor 120 MHz Operating system: Android 6 or higher, iOS 9.0 or higher Connection: D-SUB 9PIN connector Autoguider input ST4 Power consumption SXD2WL+Wireless unit: DC12V / 0.3-2.0 A (load 10 kg), 0.4-2.2 A (load 15 kg) SCOPE OF DELIVERYSXD2WL EQ mount Wireless unit 2 counterweights: 1.9 kg and 3.7 kg Mounting tools Pole finder PFL-II Cigarette lighter cable

Vixen has developed a new generation of SX mounts for demanding observers and astrophotographers. The SX2WL mount is simply operated via a Wifi module with a smartphone or tablet. By controlling the mount with your smartphone using the free STAR BOOK Wireless app, you can easily use sky navigation functions such as automatic GoTo panning of celestial objects via your smartphone or tablet. By eliminating the power consumption of the conventional LCD (STAR BOOK TEN), the power consumption on the mount is reduced by up to 20%, thus enabling longer astronomical observation and astrophotography. When the desired celestial object is selected from a list, it is automatically panned into the telescope's field of view and tracking begins.An existing STAR BOOK TEN controller can also be used on this mount without any problems. Equipped with the same precision stepper motors as the top model, the AXD mount, the SXD2WL brings a new standard of performance and precision to the Vixen mount family. With a photographic load capacity of 12 kg, the axis cross of the mount weighs just 7.0 kg (15.4 lbs) making it ideal for mobile observations.In addition, the motors mounted in the lower part of the mount also serve as a counterweight, so the mount requires fewer weights for balancing. The SX2 mount in detail Precision stepper motors and micro-step motion control systemAt the heart of the SXD2 are the precision stepper motors, which offer better performance and response than previous models. The micro-step motion control system offers powerful and yet very smooth drive characteristics, which are given both in fine movements and in fast pans. Built-in bearings The bearings of the RA and DEC axes and the worm shafts have been significantly improved to reduce the load on the motors. As a result, the motors move much more smoothly than in previous models. High-precision worm gearsHigh-precision processing technologies eliminate worm gear errors. The edges of the two worms and worm wheels are particularly smooth, enabling very precise tracking. Declination axis as counterweightThe solid motor units are installed in the lower part of the declination axis so that the center of gravity of the SXD2 is below the intersection point of the RA and DEC axes. This means you need fewer additional counterweights. Latitude setting The latitude is adjustable between 0 and 70 degrees (divided into 3 zones and adjustable +/- 15 degrees per zone, for high, medium and low latitudes); latitude scale in 2-degree increments; fine adjustment with a tangent screw head, approx. 0.8 degrees per turn. The wireless module in detail The Vixen Wifi adapter for EQ mounts allows you to control your Vixen mount via a smartphone or tablet. With the smartphone app STAR BOOK Wireless (free of charge) you can navigate the sky without any cables. The app turns your smartphone or tablet into a control unit for the equatorial mount in no time at all. The response delay of the mount, which is considered the biggest disadvantage of wireless connections, has been reduced to a level comparable to wired connections. Reduced power consumption compared to conventional controllers with LCD monitor The power consumption of the mount is reduced by up to 20%, allowing longer observations than with conventional wired controllers such as the STAR BOOK TEN. Operation similar to the STAR BOOK TEN controllerThe STAR BOOK Wireless app has a similar structure to the STAR BOOK TEN controller. Depending on the star map setting, it contains up to 259,000 celestial objects. Tap on a celestial object in the object list and start the GoTo. The mount will now automatically move to this target and bring it into the telescope's field of view. All the popular features of the STAR BOOK TEN are retained. Convenient operation When looking through the telescope operate the mount by swiping on the app's star chart. As there are no buttons, simply slide your finger over the star chart to operate the mount conveniently. Extensive astronomical data included In addition to data on easily observable celestial bodies such as Messier objects, NGC objects and IC objects, this also includes the sun, moon, planets, comets and dwarf planets. High-precision alignment By aligning the mount to one or two stars, you can already achieve fairly precise positioning. By aligning the mount to three or more stars, you can achieve high-precision alignment of the mount for high magnifications. The objects are then approached precisely and centrally in your telescope's field of view. The alignment information is saved and can be retained even when the device is switched off. By leaving the telescope in its current state after completing an observation without moving it, you can start the automatic installation with the same settings for the next observation.  Individual setting options As with the STAR BOOK TEN control unit, the app offers various individual settings, such as gear backlash compensation, night mode in red, autoguider and variable GoTo speed and LED brightness. You can also set the timing of the reversal of the objective tube (meridian flip) as desired. Even if the object moves to the south during tracking, you can prevent the telescope tube from reversing. Important note: Cannot be used on old SX mounts with the old blue Star Book! Technical information about the Wifi module: CPU with 32-bit CISC processor 120 MHz The unit is connected to the mount via a D-SUB 9PIN connector as with the STAR BOOK TEN. It has a 6-pin 6-wire modular plug for external autoguider operation. Supported operating systems are Android 6 or higher, iOS 9.0 or higher, WLAN standard: IEEE 802.11b/g/n. FEATURESRA sprocket: 180 teeth DEC sprocket: 180 teeth Shaft material and diameter: Carbon steel / Decl. 35 mm, RA 40 mm thickness  Fine height adjustment: 0° to 70°, (fine adjustment +/- 15°, height) Backsight rod: 20 mm diameter Azimuth adjustment: worm fine adjustment Power supply: DC12 V; 0.4~1.7 A Maximum load: 12 kg, photographic, without counterweight Counterweight: 1x 1.9 kg  Tripod connection: 45 mm spigot Dimensions: 36 cm (H) x 12 cm (W) x 36 cm (L), weight: 7.0 kg (15.4 lbs), without counterweight 32-bit CISC processor 120 MHz Operating system: Android 6 or higher, iOS 9.0 or higher Connection: D-SUB 9PIN connector Autoguider input: ST4 Power consumption SX2WL+Wireless unit: DC12V / 0.3-2.0 A (load 8 kg), 0.4-2.2 A (load 12 kg) SCOPE OF DELIVERYSX2WL EQ mount Wireless unit Counterweight: 1.9 kg (1pc) Mounting tools Cigarette lighter cable

Explore hidden worlds through your own eyes – with the BRESSER Pollux-I telescope starter set for budding amateur astronomers, you can go on your own journey of discovery in outer space. Everything you need is already included: the astronomical reflector telescope with 150 mm aperture and 750 mm focal length, the equatorial mount, the tripod and a wide range of accessories for astronomical observations. Perfect for getting started quickly: the system is very easy to use. In addition, the entry-level telescope impresses with its versatility: you can observe the Moon and planets as well as star clusters, gas nebulae and even galaxies through the high-quality optics. Due to the parabolic primary mirror the image delights with impressive sharpness and high contrast. In addition, the 2-inch focuser allows for the use of high-quality eyepieces. Perfect conditions for fascinating sights of the night sky! Time-proven optics for your first astro-steps – the telescope By choosing the Pollux-I, you’ll start your journey to the stars with a classic Newtonian reflector telescope. Beginners are often surprised by the fact that with telescopes of this type you don't look in at the back of the tube, but at the front and laterally. This gives you the advantage of always being able to look into the telescope in a comfortable posture, even when it's pointed vertically upwards at the sky. In addition, these reflector telescopes offer optics that are absolutely free of chromatic aberrations and thus provide good imaging properties. The large aperture of 150 mm collects a lot of light from the celestial objects. In addition, 150 mm aperture and 750 mm focal length result in a short focal ratio (ratio of aperture to focal length) of 1 to 5 (F/5). On the one hand, this makes the telescope fast and provide a bright image. On the other hand, high magnifications can be achieved. This combination makes the entry-level telescope so versatile. In addition, the Pollux-I is equipped with a parabolic primary mirror. The remarkable effect of this special mirror shape: you enjoy excellent imaging properties at all magnification levels. So you can look forward to the complete range of celestial highlights. At low to medium magnification, you can admire deep-sky objects such as open star clusters, globular clusters, gas nebulae and even galaxies such as the pair of galaxies M65 and M66 in the constellation Leo. And at high magnifications, observing the planets or details on the Moon is an absolute pleasure. You can get really close to your favourite objects: The aperture of 150 mm achieves a resolving power that allows magnifications of up to about 300x with sharp images. Technically, even higher magnifications are possible, theoretically up to 562.5x using the included accessories. However, with increasing magnification, the sharpness of the image can slowly decrease. In addition, the prevailing conditions always make a difference: How highly you can magnify always depends not only on the power of the telescope but also on the air turbulence in the atmosphere (seeing conditions). The telescope also impresses with its flexibility in terms of eyepiece compatibility: it comes with a 2-inch focuser (focuser extension) and an adapter from 2 inch to 1.25 inch. This enables you to use eyepieces with 1.25-inch sockets (about 31.7 mm) as well as eyepieces with the larger 2-inch sockets (about 50.8 mm) with large fields of view. Note for nature lovers: If you choose a Newtonian telescope like the Pollux-I reflector telescope, you can look forward to a specialist in astronomical observation. However, the image is always displayed laterally reversed as well as upside down, which makes no difference when observing the sky. However, this type of telescope is less suitable for nature and landscape observation during the day. Would you like to use your new telescope for exciting nature discoveries as well? Then we recommend that you choose one of the BRESSER refractor telescopes. Perfect foundation for fascinating discoveries – mount and tripod Your beginner's telescope is securely held by the height-adjustable aluminium tripod with equatorial mount. The special feature of this mount, also known as a parallactic mount: in contrast to azimuthal models, the movement of the celestial bodies is only compensated for on one axis instead of two. For this purpose, you simply align one axis parallel to the Earth's axis by pointing it approximately at Polaris. For precise and comfortable alignment and tracking of the entry-level telescope, the Pollux-I comes equipped with two flexible shafts with fine adjustment. And to ensure that the interchangeable eyepieces, barlow lens etc. always remain within reach, they can be stored on the tray between the tripod legs.Keep track of things automatically: For this telescope’s equatorial EQ-3 mount, the tracking motor with item number 4951400 is available as an optional accessory. This eliminates the need to manually track a celestial object set in the telescope. When this motor is installed at the mount, it automatically tracks the celestial object, keeping it in the field of view of the eyepiece. This makes observing the night sky even more comfortable! Well equipped for the ideal start – the accessories Your entry-level telescope comes with a wide range of astronomy accessories so that you can start to be amazed right away. For example, the LED viewfinder helps you align the telescope and find celestial objects. Installed in parallel on the telescope, this direction finder shows you a red dot when you look through it. It appears to hover in front of the sky and thereby shows you where the telescope is pointing. Varying view of the sky: With the two eyepieces with 1.25-inch sockets (31.7 mm), you can admire your astronomical discoveries at different magnifications. The 3x barlow lens already included in the set triples the magnification of the eyepiece you are using. Enjoy safe observations of our Sun with the included solar filter. This way you can easily take a closer look at sunspots and granulation on our own star. CAUTION: Never point the telescope at the Sun without the solar filter! Astrophotography for beginners: with the smartphone adapter, you can use your mobile phone as a camera on the telescope. This way you will quickly impress friends and relatives with your own first snapshots e. g. of the Moon or the Sun. FEATURES Reflector telescope with 150 mm aperture and 750 mm focal length Reflector type Newton with parabolic primary mirror Very well suited for observing the Sun, Moon and planets as well as star clusters, gas nebulae and galaxies Height-adjustable tripod with equatorial EQ3 mount Precise movement through flexible shafts and fine adjustment in both axes Easy to use, very good for beginners Focal ratio F/5, thus very suitable for many celestial objects 2-inch (50.8 mm) focuser with adapter to 1.25-inch (31.7 mm) Two eyepieces and one barlow lens with 1.25-inch (31.7 mm) sockets for different magnifications Safe solar observation with the included solar filter First steps in astrophotography with smartphone camera adapter SCOPE OF DELIVERY Telescope Aluminium tripod Equatorial EQ3 mount Adapter from 2 inch to 1.25 inch Eyepieces: 4 mm and 20 mm (1.25-inch sockets) Barlow lens 3x (1.25-inch socket) LED illuminated dot finder Solar filter Smartphone camera adapter Accessory tray Astronomy software as download Instruction manual

The BRESSER Biolux NV comes with a wide range of accessories and is an ideal beginners' microscope. A unique feature of these models, the Barlow zoom system is inside the eyepiece tubes: With the barlow lens the magnification can be  varied by a factor of 2 in visual observation. This feature, together with 3 objectives and 2 interchangeable wide field eyepieces gives a magnification range from 20x to 1280x. With the mechanical desk you can move your sample precisely even when observing at high magnifications. For optimal illumination a variable LED for transmitted and incident light together with a filter wheel gives the ideal light for all samples. Light from above is especially imortant to observe non transparent samples like leaves, small insects and much more. This makes microscopy for beginners very easy! The power is supplied by batteries (3x AA). A dust cover, 5 prepared slides and 5 blank slides and cover slips are included for making your own samples. With the included HD camera you can observe your samples on the computer screen, and capture images and video with the included Windows software. The software is compatible with Windos 8.1 / 10 and Win 11. With this camera, you can always document your interesting observations and share them with others. FEATURESbiological microscope with HD cameraLED light for transmitted and incident lightbattery-poweredlots of accessoriesincident light for objects not higher than 4mm SYSTEM REQUIREMENTSWindows 8.1, 10 or 11Intel i3, i5, i7 or i9 CPU from the 2nd generation orAMD FX or Ryzen CPUOptical Disk Drive or internet connection for software downloadUSB 2.0 SCOPE OF DELIVERYSolid metal Microscopemechanical deskHD camera with metal housing, resolution 1280 x 7202 eyepieces: 5x and 16x3 objectives: 4x, 10x and 40x1 Barlow lens with 2x magnificationMicroscope toolsmechanical cross table5 prepared slides5 blank slides3x AA batteriesDust cover and hard case

The BRESSER Hunter 10x25 binoculars is a new design offering excellent value for money. Due to its compact and handy shape this series is an ideal companion for many situations. The fully coated optics and the solid mechanics allow for a good and true colour imaging. The ergonomic shape of the armouring and the non-slip rubber provide a safe grip. BK-7 optical glass is used for a good image reproduction. These binoculars are perfect for hiking and other outdoor activities. Thanks to its small dimensions and low weight it can be stowed easily in your luggage. FEATURESCompact and lightweight pocket binoculars Optical design: roof prism binoculars Magnification: 10x Lens diameter: 25 mm Fully coated optics for good image quality Ergonomic shape and non-slip rubber coating for a secure grip With optical BK-7 glass material SCOPE OF DELIVERYBinocularsCarry caseCarrying strapLens clothmanual

FEATURES5.7'' colorful display for time and detailed weather informationWIFI connection with internet time synchronizationReceives weather data from 5in1 profi sensor and from wireless thermo-hygro sensor via 868 MHz transmissionPublish local weather station data on weather underground and weather cloudDisplays time, calendar, weekday and moon phaseAlarm clockIce pre-alert functionIndoor temperature (°C/°F) and humidity with comfort indicationOutdoor/Channel’s temperature (°C/°F) and humidity readingsGust or average wind speedWind direction (16-direction indicator)Rain rate (hourly, daily, weekly, monthly, total rainfall)Weather forecast (sunny, partly cloudy, cloudy, rainy, stormy, snowy)Barometric pressure in relative or absolute readings (hPa, inHg, mmHg)Smart outdoor “Feels like” sensation readingWeather index for outdoor feels like, dew-point, Wind chill, Heat indexMax/Min memory records and past 24 hours (hourly record)Hi/Lo alert with flash LED indicatorWeather calibration (on set-up UI)3-mode brightness: Hi / Lo / Off7 languages for weekday (EN/ DE/ FR/ ES/ IT/ NL/ RU)Support firmware update (TBC)Support a wireless 5-in-1 professional weather sensor (Included)Support up to 7 pcs wireless extra sensors (Optional) (item no. 7009999) DELIVERY SCOPEMain unitProfessional 5in1 sensor incl. mounting material100-240V/50 Hz power adapter and cable

Observing the stars like a professional - very easy with the BRESSER JUNIOR refractor telescope 70/700 EL. It is a complete system for the exploration of the wonders of the universe, consisting of telescope, mount, tripod and all accessories needed. With an aperture of 70 mm it reveils already many details of celestial objects. The mount can not only swing the telescope left / right and up / down, it can also be used in a so-called equatorial mode, as scientists do in their observatories (see further under Special features). An additional finder scope mounted on the telescope is useful for locating celestial objects. With the erecting lens many exciting things in the environment can also be seen during daytime. With the height-adjustable tripod, the telescope can each be brought to an optimal height for large or small observers. The supplied diagonal mirror ensures a comfortable viewing. At night the moon and planets may like Saturn and Jupiter can be explored. But thanks to the 70 mm wide aperture of the telescope also many celestial objects outside our solar system are within the reach of this telescope. Star clusters many light years away and nebula impress young and old stargazers. SPECIAL FEATURESMounting with wedge: At first glance, the NG mount of the refractor telescope 90/700 NG is a very ordinary azimuth mount: an axis for left / right and one for up / down, as we know it from normal camera tripods. This mode makes sense especially with observations during the day. With the built-in wedge it can be tilted, so the whole mount can be converted to an equatorial mount for astronomy with a single operation. For use of the equatorial mount an axis is aligned with the North Star. When tracking a celestial object only a single axis needs to be moved, which clearly is a relief compared to tracking an object on the night sky with mounts that only have left / right and up / down axis. FEATURESideal beginner's setsuitable for lunar, planetary and nature observationsmount can be used in two ways: alt-azimuth and equatorialSCOPE OF DELIVERYrefractor telescope 70/900three eyepieces: 4 mm (225x), 12 mm (75x) and 20 mm (45x)heigth-adjustable aluminium tripod with accessory tray1.5x errecting lens for a laterally correct and upright imageNG mountfinderscope 6 x 25astronomy software for PC90° diagonal mirror